Canon VB-M42 매뉴얼

Restore Default Settings

181

A

ppendix

There is no on/off switch on the camera. Turn the 

camera on and off by plugging in or unplugging LAN 

cable (PoE power supply), AC adapter, or external 

power plug.

The reset switch is located in a recessed area. Push 

the switch using the tip of a slender object such as a 

clip. 

All settings of the camera, except for the date and 

time, are restored to factory default settings. 

For dome case attachment, see the “Installation 

Guide” included with the camera.

Turn off the camera. 

Turn on the power while pushing the reset switch, and 

keep pushing the reset switch for 5 seconds or more.

If the reset switch is pushed, network-related settings will also 
be restored to factory default settings including the camera's IP 

address, subnet mask, default gateway address, etc. 

Accordingly, you can no longer operate the camera from the 
PC you were using to connect to the camera before. When 

initializing the camera, use the “Camera Management Tool” 

installed in your PC to set an IP address appropriate for the 
environment in which the camera is used (See “Making Initial 

Camera Settings” (p. 28)).  

Reset Switch

Reset Switch

For VB-H630VE/VB-H630D/VB-M620VE/VB-M620D, 

attach the dome case.

Reset Switch

Reset Switch