Canon imagePROGRAF iPF670 매뉴얼

 

When the processing is complete, "Completed! Turn Power Off!!" is
displayed. Press the Power button to turn the power off.

Pack the printer

Disconnect the power cord and interface cable.

Important

Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and transfer
it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and follow this
procedure again.

 

Tape down printer covers to secure them, in the reverse order
of tape removal during installation.

Remove the Stand by reversing the installation procedure, when it was attached to the printer.

Disassemble and repackage the Stand by following the installation procedure in reverse.

Repack the Roll Holder, Holder Stopper, and printer in shipping materials, and then package them in a shipping
box.

The basic workflow for reinstalling the printer is as follows.
For detailed instructions, see the Setup Guide.

Assemble the stand (optional)

 

If you are using the optional Stand, assemble the Stand by re-
ferring to the Printer Stand Setup Guide included with the
Stand.

 

 

 

Reinstalling the Printer

                                                                                                                                                                                                    

iPF670

                                                                                                                                                                                                                             

Maintenance and Consumables

Other Maintenance

 

570