Canon imagePROGRAF iPF6400 매뉴얼
Messages regarding printheads
Messages regarding printheads
Cannot adjust printhead.
Cannot adjust printhead.
Cause
Corrective Action
The Printhead nozzles are clogged.
Execute Head Posi. Adj. again, as follows.
1.
Press the OK button to clear the error.
2.
Print a test pattern to check the nozzles.
3.
Clean the Printhead if the nozzles are clogged.
4.
Execute Head Posi. Adj. again.
The Printhead cannot be aligned; highly
transparent film is loaded.
transparent film is loaded.
Press the OK button to clear the error.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
We recommend using a type of paper that you often use, other than film, for Printhead adjustment.
PHeads: wrong pos.
PHeads: wrong pos.
Cause
Corrective Action
The printheads are installed in the
wrong positions.
wrong positions.
Open the Top Cover and switch the Printhead used once in the right side to the right side. Switch the
Printhead used once in the left side to the left side.
Printhead used once in the left side to the left side.
Wrong x printhead. (x is L, R, or not displayed)
Wrong x printhead. (x is L, R, or not displayed)
Cause
Corrective Action
An incompatible Print-
head has been installed.
head has been installed.
Open the Top Cover. Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if
Printhead R is displayed. If neither left or right is indicated, replace both Printhead L and Printhead R with new ones.
Printhead R is displayed. If neither left or right is indicated, replace both Printhead L and Printhead R with new ones.
x printhead error (x is L, R, or not displayed)
x printhead error (x is L, R, or not displayed)
Cause
Corrective Action
There is a prob-
lem with the Print-
head.
lem with the Print-
head.
Follow these steps to replace the Printhead.
1.
Open the Top Cover.
2.
Replace the Printhead L with a new one if Printhead L is displayed and the Printhead R if Printhead R is displayed. If
neither left or right is indicated, replace both Printhead L and Printhead R with new ones.
neither left or right is indicated, replace both Printhead L and Printhead R with new ones.
Follow these steps to replace the Printhead.
1.
Turn off the printer, wait a while, and then turn it on again.
2.
Open the Top Cover.
3.
Replace the left printhead with a new one if Printhead L is displayed and the right one if Printhead R is displayed. If
neither left or right is indicated, replace both printheads.
neither left or right is indicated, replace both printheads.
Cannot adjust printhead.
iPF6400
Error Message
Messages regarding printheads
928