Canon Océ VarioPrint 6000+ Series 매뉴얼

Description of the [Transaction] section

1

Dashboard

The dashboard displays the following information for
transaction printing.
• The connection status
• The IP address of the host that sends the jobs
• The name of the active transaction job
• The progress of the active transaction job

2

[Connection]

The [Connection] section gives access to the following
functions.
• Turn the transaction printing mode on or off
• Select the setup for the transaction jobs

You can define setups in the Settings Editor ([Transac-
tion printing] -> [Setups]).

• Put the printer online or offline. The printer must be

online for the host to be able to connect to the printer.

3

[Print protocol]

Display the active printer description language (read-on-
ly).
You can change the active PDL in the Settings Editor
([Transaction printing] -> [Settings] -> [Requested active
PDL]).
When the requested active PDL is changed, the new PDL
becomes effective when you put the printer online.

4

[Image shift]

Display and change the active image shift settings, for
example when the images on the front and back of a
sheet are not aligned correctly.

NOTE

Before you begin, the list of [Scheduled jobs] must be empty.

The following table describes the sequence of steps for transaction printing.

1

Switch the printer in-
to the transaction
printing mode.

Via the operator panel: [System] ->
[Transaction] -> [Transaction print-
ing mode] -> [On].

2

Select the active set-
up that you need.

• Via the operator panel: [System]

-> [Transaction] -> [Active trans-
action setup], or

• Via the Settings Editor: [Trans-

action printing] -> [Setups], or

• By the host via the data stream

(when the printer is online and
connected).

4