Canon Océ VarioPrint 6000+ Series 매뉴얼
Operator Manual
Page 67
4
.
10 "TIMER" menu
The "TIMER" menu can be programmed to start and stop the glue tank heater
automatically with no input from the operator.
In this way, the glue tank can begin to heat up before the operator arrives, and the glue
will be at the right temperature when the operator starts work.
When the tank heater starts, the tank enters stand-by mode. The target temperature is
set to Min or Max temperature.
To access the "TIMER" menu, turn the binder's main switch to the third position
(
on 2).
The following image will appear on the screen.
Using the
and
icons, the operator can select or deselect the days of the week
when the tank should be automatically heated, and control the start and stop times for the
heater.
The
icon appears on the screen if the programmed times are inconsistent
(e.g. from 8.00 to 7.00).
The
icon toggles the "TIMER" menu.
IMPORTANT:
The timer mode is only active if the main power switch is in the ON
2
position.