Canon Océ VarioPrint 6000+ Series 매뉴얼
Apply Grease to the Driver Bar
Step
Action
Information
1
Apply a thin line of grease from the
tube (20 mm long and maximum
0.5 mm thick) to the visible surface
of the driver bar.
tube (20 mm long and maximum
0.5 mm thick) to the visible surface
of the driver bar.
1.2"
[53] Maximum dimensions of the line of grease
NOTE
Make sure that you apply
the grease in an upward
direction, from the bot-
tom of the driver bar.
the grease in an upward
direction, from the bot-
tom of the driver bar.
[54] Driver bar
A = Driver
B = Apply grease here
C = Driver bar
B = Apply grease here
C = Driver bar
NOTE
Only apply the grease as
shown. If you apply addi-
tional grease, the paper
will become stained.
shown. If you apply addi-
tional grease, the paper
will become stained.
[55] Apply the grease to the driver bar
A = Start
B = Stop
B = Stop
2
Fit the wire holder.
Apply Grease to the Driver Bar
120
Chapter 7 - Maintenance