Canon PowerShot N2 White 매뉴얼

113

 

●

For details on charging time and the number of shots and 
recording time possible with a fully charged battery pack, see 
“Number of Shots/Recording Time, Playback Time” (

 

●

Charged battery packs gradually lose their charge, even when 
they are not used. Charge the battery pack on (or immediately 
before) the day of use.

 

●

The charger can be used in areas with 100 – 240 V AC power 
(50/60 Hz). For power outlets in a different format, use a 
commercially available adapter for the plug. Never use an 
electrical transformer designed for traveling, which may damage 
the battery pack.

Powering the camera with AC Adapter Kit ACK-DC70 (sold separately) 
eliminates the need to monitor the remaining battery level.

 

●

Follow step 1 in “Inserting the Battery 
Pack and Memory Card” (

open the cover.

 

●

Holding the coupler facing as shown, 
insert the coupler just as you would 
a battery pack (following step 2 in 
“Inserting and Charging the Battery Pack” 
(

 

●

Follow step 3 in “Inserting and Charging 
the Battery Pack” (

cover.

 

●

After aligning the 

 marks on the battery 

pack and charger, insert the battery pack 
by pushing it in (1) and down (2).

 

●

Flip out the plug (1) and plug the charger 
into a power outlet.

 

●

The charging lamp turns orange, and 
charging begins.

 

●

When charging is finished, the lamp turns 
green.

 

●

After unplugging the battery charger, 
remove the battery pack by pushing it in 
(1) and up (2).

 

●

To protect the battery pack and keep it in optimal condition, do not 
charge it continuously for more than 24 hours.