Canon EF 35mm f/1.4L II USM 매뉴얼

CT1-8605-000 

1504SZ 

© CANON INC. 2015

●

❺

●

●

❻

●

❹ 

To compensate for shifting of the infinity focus point that results from changes in 

temperature. The infinity position at normal temperature is the point at which the 

vertical line of the distance scale L mark is aligned with the distance index ❹ .

For accurate manual focusing of subjects at infinity, look through the 

viewfinder or look at the magnified image* on the LCD screen while 

rotating the focusing ring.

* For cameras with Live View shooting capability.

The depth of field is the distance in front of and behind the plane of focus on the 

subject that appears sharp. The depth of field is indicated by the area between 

the depth-of-field scale lines below the distance scale.

The depth-of-field scale is an approximate indicator.

The EW-77B hood can keep unwanted light out of the lens, and also protects the 

lens from rain, snow, and dust.

To attach the hood, align the hood’s attachment position mark with the red dot 

on the front of the lens, then turn the hood in the direction of the arrow until the 

lens’s red dot is aligned with the hood’s stop position mark 

❺

.

To remove the hood, hold down the button on the side and turn the hood in the 

direction of the arrow until the position mark on the hood aligns with the red dot 

❻

.

The hood can be reverse-mounted on the lens for storage.

●

 Part of the picture may be blocked if the hood is not attached properly.

●

 When attaching or detaching the hood, grasp the base of the hood to 

turn it. To prevent deformation, do not grasp the rim of the hood to turn 

it.

You can attach filters to the filter mounting thread (ø72 mm) on the front of the 

lens.

●

 Only one filter may be attached.

●

 Use the Canon Circular Polarizing Filter PL-C B (ø72mm) as the 

polarizing filter.

●

 To adjust the polarizing filter, first remove the lens hood.

You can attach extension tube EF12 II or EF25 II for magnified shots. For 

shooting distance and magnification, see the extension tube specifications.

MF mode is recommended for accurate focusing.

Attaching a close-up lens 500D (72 mm) enables close-up photography. 

Magnification is from 0.07 to 0.27 times.

●

 Close-up lens 250D cannot be attached because there is no size that 

fits the lens.

●

 MF mode is recommended for accurate focusing.

●

 The lens length is measured from the mount surface to the front end of the 

lens. Add 24.2 mm when including the lens cap and dust cap.

●

 The size and weight listed are for the lens only, except as indicated.

●

 The extenders cannot be used with this lens.

●

 All data listed is measured according to Canon standards.

●

 Product specifications and appearance are subject to change without notice.

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, 

and (2) this device must accept any interference received, including interference 

that may cause undesired operation.

Do not make any changes or modifications to the equipment unless otherwise 

specified in the instructions. If such changes or modifications should be made, 

you could be required to stop operation of the equipment.

This equipment has been tested and found to comply with the limits for a class 

B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and 

can radiate radio frequency energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or 

television reception, which can be determined by turning the equipment off and 

on, the user is encouraged to try to correct the interference by one or more of 

the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3(B)/NMB-3(B)

* Sold Separately

Angle of view

Lens 

construction

Minimum 

aperture

Max. 

magnification

Min. focusing 

distance

Filter diameter

Max. diameter and length Weight (Approx.)

Hood

Lens Cap

Case*

Diagonal

Vertical

Horizontal

EF35mm f/1.4L II USM

63°

38°

54°

11-14

22

0.21x

0.28m/0.92ft

72mm

80.4x105.5mm 

(3.2”x4.2”)

760g/26.8oz.

EW-77B

E-72 II

LP1219

Magnification

(X)

Focusing Distance Range

(mm) (inch)

EF35mm f/1.4L II USM

EF12 II

0.58-0.36

194-229 (7.6-9.0)

EF25 II

1.03-0.8

184-192 (7.2-7.6)

Button

Infinity compensation mark

Distance index

Depth-of-field scale