Canon EOS Rebel T6s EF-S 18-135mm IS STM Lens Kit 매뉴얼

154

If you shoot an image with a fast shutter speed under a light source 
such as fluorescent light, the blinking of the light source causes flicker 
and the image may be vertically unevenly exposed. If continuous 
shooting is used under these conditions, uneven exposures or colors 
across the images may result.
With anti-flicker shooting, the camera detects the frequency of the light 
source’s blinking and takes the picture when the flicker causes less 
effect on exposure or color.



Under the [z3] tab, select [Anti-
flicker shoot.], then press <0>.



Select [Enable], then press <0>.



The image will be taken with reduced 
unevenness of exposure or color 
caused by the flicker.

3

 Reducing FlickerK



When [Enable] is set and you shoot under a flickering light source, the 
shutter-release time lag may become slightly longer. Also, the 
continuous shooting speed may become slightly slower, and the 
shooting interval may become irregular.



This function does not work with Live View shooting and movie shooting.



In the <d> or <f> mode, if the shutter speed changes during 
continuous shooting or if you shoot multiple shots of the same scene at 
different shutter speeds, the color tone may be inconsistent. To avoid 
inconsistent color tones, use the <s> or <a> mode at a fixed shutter 
speed.



The color tone of images shot when [Anti-flicker shoot.] is set to 
[Enable] may look different from when [Disable] is set.



Flicker at a frequency other than 100 Hz or 120 Hz cannot be detected.