Canon EOS 7D Mark II Wi-Fi Adapter Kit 매뉴얼

8

3: Custom ControlsN

452

The AF will stop while you hold down the button assigned to this 
function. Convenient when you want to stop the AF during AI Servo AF.

After setting and assigning this function to a button, you can apply the 
following settings by holding down the assigned button for AF: AF area 
selection mode (p.90), Tracking sensitivity (p.113), Acceleration/
deceleration tracking (p.114), AF point auto switching (p.115), Servo 1st 
image priority (p.117), and Servo 2nd image priority (p.118). Convenient 
when you want to change the AF characteristics during AI Servo AF.

*2:On the setting screen, press the <B> button to 

display the detailed settings screen. Turn the <5> 
or <6> dial to select the parameter to be 
registered, then press <0> to append a 
checkmark [X]. When you select a parameter and 
press <0>, you can adjust the parameter.
By pressing the <L> button, you can revert the 
settings to their defaults.

You can switch the AF operation. In One-Shot AF mode, when you hold 
down the button to which this function is assigned, the camera switches 
to AI Servo AF mode. In the AI Servo AF mode, the camera switches to 
One-Shot AF mode only while you hold down the button. Convenient 
when you need to keep switching between One-Shot AF and AI Servo 
AF for a subject that keeps moving and stopping.

During metering, when you press the button assigned to this function, 
the camera will switch to the registered AF point.

*3:On the setting screen, when you press the <B> button, you can select [Switch 

only when btn is held] or [Switch each time btn is pressed]. To register the AF 
point, see page 450.

: ONE SHOT z AI SERVO