Olympus E-620 지침 매뉴얼
12
EN
Attaching a lens to the camera
2
1
1
2
3
4
3
2
1
Body cap
Lens cap
Alignment mark (Red)
Lens release button
1
Remove the body cap from the camera
and the rear cap from the lens
and the rear cap from the lens
2
Attach a lens to the camera
• Make sure the
ON/OFF switch
is set to OFF.
• Do not press the lens release
button.
3
Remove the lens cap
(
(
3
,
4
)
Removing the lens from the
camera
camera
While pressing the lens release button
(1), rotate the lens in the direction of
the arrow (2).
(1), rotate the lens in the direction of
the arrow (2).
• Align the lens attachment mark (red)
on the camera with the alignment
mark (red) on the lens, then insert the
lens into the camera’s body (1).
mark (red) on the lens, then insert the
lens into the camera’s body (1).
• Rotate the lens in the direction
indicated by the arrow until you hear it
click (2).
click (2).
Rear cap
Lens attachment
mark (Red)
mark (Red)
1
2
s0023_e_00_0_unified.book Page 12 Monday, February 2, 2009 5:18 PM