Olympus c-5060 wide zoom 매뉴얼 소개

ac to select x3 or 

x5, then press 

e.

• In some combinations of picture size and record mode, only x3 is 

available.

• Press 

e repeatedly until the menu disappears.

• Press the shutter button fully and keep it pressed to shoot the preset 

number of pictures. You can stop shooting at any time by releasing 
the shutter button.

• Sequential shooting (i, j, k, 7) is not possible in 

the following situations:

• When the record mode is set to TIFF.
• When NOISE REDUCTION is set to ON.

• j and k are not available when the record mode is set to 

RAW.

• In sequential shooting mode (i, j, k, 7), the built-

in flash does not fire. The external flash does not fire in 7 mode.

• Auto bracket shooting is not available in M mode.
• Since the shutter speed is set to 1/30 sec.max. except in S and M 

mode, exposure is decreased when shooting a dark subject to 
prevent camera movement.

• For auto bracketing in modes other than S mode, shooting is 

automatically set to 1/30 sec. if the shutter speed was other than 
1/30 sec. for an exposure differential of 0.

• If the battery power is low and the battery check blinks during 

sequential shooting, shooting stops and the camera starts saving 
the pictures you have taken. Whether or not all of the shots are 
saved depends on how much battery power remains.

• In Auto bracket shooting, if available space on the card does not 

exceed the number of set pictures, the next picture may not be 
taken.

Note