Olympus E-620 매뉴얼 소개

82

EN

Playback functions

The basic procedure for viewing pictures are as shown below.
However, before using any of these functions, follow Step 1 below. You can set the camera to 
automatically switch to single-frame playback mode after shooting. 

g“REC VIEW” (P. 93)

q button (Single-frame playback).

• The last recorded image appears.
• The LCD monitor turns off after more than 1 minute if no 

operations are performed. The camera will turn off 
automatically if there is no operation after 4 hours. Turn 
on the camera again.

p to select images you want to view. You can 

also turn the control dial to switch to U for close-
up playback.

q button

INFO button

< button

j

p

Press 

p to change the 

close-up position.

Press 

p to move the display 

of the close-up position.
When [g FACE DETECT] 
(

gP. 39) is set to [ON], a 

frame is displayed around a 
detected face. Press 

i to 

move the frame to another 
face.

Press 

hi to view frame-by-

frame close-ups.
When [g FACE DETECT] 
is set to [ON], press 

fg 

to move to another face in 
close-up position.
• Press the 

INFO button to 

return to close-up 
playback.

Press the 

INFO button

f : Displays the frame that is 

stored 10 frames back

g : Displays the frame that is 

stored 10 frames ahead

i : Displays the next frame
h : Displays the previous frame

Press the 

INFO button

• To exit the playback mode, press the 

q button again.

• Pressing the shutter button halfway 

resumes the shooting mode.

Press the 

< button

• Plays back the image at a 

10× magnified close-up 
position.

U

G

s0023_e_00_0_unified.book  Page 82  Monday, February 2, 2009  5:18 PM