Olympus E-620 매뉴얼 소개

92

EN

Lets you erase recorded images. You can select single-frame erase, which erases only the 
currently displayed image; all-frame erase, which erases all the images stored on the card; or 
selected frame erase, which erases only the frames selected.

x

• When you perform all-frame or selected frame erase on images recorded using RAW+JPEG, 

both the RAW and JPEG images are erased. When using single-frame erase, you can select 
whether to erase the JPEG, RAW, or both RAW and JPEG images. 

g“RAW+JPEG 

ERASE” (P. 105)

• Protected images cannot be erased. Cancel protected images, then erase them.
• Once erased, images cannot be restored. 

g“Protecting images” (P. 91)

D 

fg to select [YES], then press the i button.

This function lets you erase selected images at one time during single-frame playback or 
index display.

i button.

• The selected images will be shown with v.
• To cancel your selection, press the 

i button again.

• During index display, press 

p to select the images you want to erase and press the i 

button.

p to display the next images you want to erase and press the i button.

D button.

fg to select [YES], then press the i button.

MENU [W] [CARD SETUP]

fg to select [ALL ERASE], then press the i button.

fg to select [YES], then press the i button.

• All frames will be erased.

j If you have set “QUICK ERASE” (gP. 105) to [ON], pressing the 

D button will erase an image 

immediately.

j You can set the initial position of the cursor to [YES]. g“PRIORITY SET” (P. 105)

D button

s0023_e_00_0_unified.book  Page 92  Monday, February 2, 2009  5:18 PM