Olympus fe-310 사용자 설명서

다운로드
페이지 61
Me
nu opera
tions
EN
 27
The pixel mapping feature allows the camera to check and adjust the CCD and image 
processing functions. It is not necessary to operate this function frequently. Approximately 
once a year is recommended. Wait at least one minute after taking or viewing pictures to 
allow the pixel mapping function to perform properly. If you turn the camera off during pixel 
mapping, start again.
Select [PIXEL MAPPING]. When [START] is displayed, press 
.
• Select [MY FAVORITE] and press Y to set a still picture registered in “My Favorite” as the 
background.
You can set the following with [SOUND SETTINGS].
• Setting the volume of the button operation sound. (BEEP)
• Selecting the volume of the shutter button. (SHUTTER SOUND)
• Adjusting the volume of the camera warning sound. (
8)
• Adjusting the volume during playback. (
q VOLUME)
• You can set all the sounds muted at once by setting [SILENT MODE].
“SILENT MODE Muting operational sounds” (P. 22)
PIXEL MAPPING
.................................................. Adjusting the image processing function
K/
q
.........................................................Turning on the camera with the 
K
 or 
q
 button
YES
Pressing 
K turns on the camera and starts the camera in the shooting mode.
Pressing 
q turns on the camera and starts the camera in the playback mode.
NO
The power is not turned on. To turn on the camera, press o.
MENU COLOR  
......................................... Setting the menu screen color and background
NORMAL
/ COLOR1 / COLOR2 / COLOR3 / MY FAVORITE
SOUND SETTINGS  
......................................... Setting the sound output from the camera 
BEEP
OFF (No sound) /
LOW  / HIGH
SHUTTER SOUND
OFF (No sound) /
LOW  / HIGH
8
OFF (No sound) /
LOW  / HIGH
q VOLUME
OFF (No sound) /
1 / 2 / 3 / 4 / 5
s
........................................................................................... Adjusting the monitor brightness
BRIGHT/ NORMAL