Olympus DM-520 매뉴얼 소개

a

•  Select the memory with an alarm 

playback file using the + or – button 

and press the OK or 9 button.

The recorder will move to the folder 

settings with the file with alarm 

playback.

•  Select the folder using the + or 

– buttons and press the OK or 9 

button to move to file selection.Use 

the + or – button to select the file in 

the same way.

2

 Press the OK or 9 button to exit 

[Playback File] selection.

1

 Pressing + or − button to select 

[Finish].

2

 Press the OK or 9 button to 

complete the setup screen.

Programmed  settings  will  be  applied 

and the screen will return to the preset 

number selection menu. If the [On/Off] 

setting is set to [On], 

 will appear on 

the display.

a

 When setting to [On]

Select [Every Week] and press the OK or 
9

 button to move to the selection of 

[Day]. Press the + or – button to select a 

day of the week.

2

 Press the OK button to exit [Day] 

selection.

1

 Press the 9 or 0 button to 

select "Hour"and "Minute" in the 

[Start Time] and "Hour" and "Minute" 

in the [Stop Time].

2

 Press the + or – button to set.

3

 Press the OK button to exit [Start

Time] selection.

1

 Press the + or – button to adjust the 

volume. Press the PLAY ` button to 

check the volume.

2

 Press the OK button to exit [Volume] 

selection.

1

 Press the + or – button to select an 

alarm sound from among [Alarm1], 

[Alarm2] and [Alarm3]. Press the 

PLAY ` button to check the alarm 

sound.

2

 Press the OK button to exit [Alarm

Sound] selection. 

1

 Press the + or – button to select from 

[No File Play], [File Select].

  [No File Play]: Sounds alarm only.

  [File Select]: Plays back a selected file 

after the alarm. 

•  When [File Select] is selected and 

the OK or 9 button is pressed, the 

recorder will move to the [Memory

Select] setting.

When  setting  other  preset  numbers, 

repeat Steps 2 through 6.

When the 9 button is pressed in the 

Select  in  Advance  Menu,  the  settings 

selected can be confirmed.

 Press the F or STOP 4 button to

•  The 

 will appear on the display.