Olympus µ 1000 사용자 설명서

   EN

Usi

ng OLYMPUS Mast

er

OS 

Windows 98SE/Me/2000 Professional/XP

CPU 

Pentium III 500 MHz or later

RAM 

128 MB or more (at least 256 MB is recommended)

Hard disk capacity  300 MB or more

Connector USB 

port

Monitor 

1,024 × 768 pixels, 65,536 colors or more

• Windows 98 is not supported.

• Data transfer is only guaranteed on computers with a factory installed OS.

• To install the software in Windows 2000 Professional/XP, you must log on as a user with 

administrators’ privileges.

• Internet Explorer and QuickTime 6 or later should be installed on your computer.

• Windows XP corresponds to Windows XP Professional/Home Edition.

• Windows 2000 corresponds to Windows 2000 Professional only.

• If you are using Windows 98SE, the USB driver is installed automatically.

OS 

Mac OS X 10.2 or later

CPU 

Power PC G3 500 MHz or later

RAM 

128 MB or more (at least 256 MB is recommended)

Hard disk capacity  300 MB or more

Connector USB 

port

Monitor 

1,024 × 768 pixels, 32,000 colors or more

• Mac versions earlier than OS X 10.2 are not supported.

• Operation is only guaranteed on a Macintosh equipped with a built-in USB port.

• QuickTime 6 or later and Safari 1.0 or later must be installed.

• Be sure to remove the media (drag & drop onto the trash icon) before performing the following 

operations. Failure to do so could result in unstable computer operation and the need to reboot.

• Disconnect the cable connecting the camera to the computer

• Turn off the camera

• Open the camera’s battery compartment/card cover

• The OLYMPUS Master setup screen is displayed.
• If the screen is not displayed, double-click the “My 

Computer” icon and click the CD-ROM icon.

• The QuickTime installation screen is displayed.
• QuickTime is required to use OLYMPUS Master. If the 

QuickTime screen is not displayed, QuickTime 6 or later 
is already installed on the computer. In this case, go to 
step 4.