Olympus Stylus 850 SW 매뉴얼 소개
50
EN
Usi
ng OLYMPUS Mast
er
Please take care that your battery is fully charged!
1
Make sure that your computer is connected to the Internet.
2
Plug the USB cable into the USB port on the computer.
3
Plug the other end of the USB cable into the camera’s USB connector.
• The camera turns on automatically.
• The monitor turns on and the selection screen for the USB connection is displayed.
• The monitor turns on and the selection screen for the USB connection is displayed.
4
Select [PC], and press
o.
5
In the browse window, select “Camera”, then “Update Camera/Add
Display Language”.
Display Language”.
• The confirmation window for updating is displayed.
6
Click “OK”.
• The updating the camera window is displayed.
7
Click “Add Language” in the updating
camera display.
camera display.
• The “Add Display Language of Camera” window
is displayed.
8
Click
and select a language.
9
Click “Add”.
• The new language is downloaded to your camera. Please do not remove any cable or the
battery while the camera is processing.
10
After the download procedure the camera display will show “OK”. You
can remove the cables and turn power off. After restarting the camera
you will be able to choose the new language from [SETUP].
can remove the cables and turn power off. After restarting the camera
you will be able to choose the new language from [SETUP].
To increase the number of languages
d4361_e_0000_7.book Page 50 Monday, November 5, 2007 3:34 PM