Olympus μ TOUGH-8010 지침 매뉴얼
51
EN
For information on using the menus, see “Using the Menu” (p. 4).
To adjust the altitude/water depth display
1 Use
FG to select the current altitude/water depth, and press the
A button to set.
CALIBRATE
MENU
OK
SET
BACK
1200 m
1200 m
Operating the camera by tapping the body [TAP CONTROL]
(STYLUS TOUGH-8010/
μ TOUGH-8010 and STYLUS TOUGH-6020/μ TOUGH-6020 only)
t (Settings 3) X TAP CONTROL
Submenu 2
Application
OFF
Cancels [TAP CONTROL].
ON
[TAP CONTROL] is activated.
CALIBRATE
Adjusts the tap strength and intervals between multiple taps on each side of the camera
body. (top, left, right, & back)
body. (top, left, right, & back)
Operating during shooting mode
(Example: Flash mode)
(Example: Flash mode)
1 Tap the right or left side of the camera
body once. Then tap the top side of the
camera once.
camera once.
The fl ash mode selection screen is displayed.
2 Tap the right or left side of the camera
body to select a function.
3 Tap the back of the camera body twice to
confi rm your selection.
14
M
44
P
P
0.0
0.0
AUTO
WB
AUTO
WB
AUTO
ISO
AUTO
ISO
FLASH AUTO
FLASH AUTO
●
Tap the camera fi rmly using the pad of your
fi nger.
When the camera is stabilized on a tripod
for example, tap control may not work
properly.
properly.
To prevent dropping the camera when using
tap control, strap the camera to your wrist.
Operating during playback mode
When switched to playback mode by tapping
the top of the camera body twice, the
operations below can be used.
Display next image: Tap the right side of
the camera once.
Display previous image: Tap the left
side of the camera once.
the top of the camera body twice, the
operations below can be used.
Display next image: Tap the right side of
the camera once.
Display previous image: Tap the left
side of the camera once.
Fast forward and reverse: Tilt the
camera to the right or the left.
camera to the right or the left.