Olympus TG-810 지침 매뉴얼

38 EN

Sequential shooting (Drive)

Pictures are taken sequentially while the shutter button 
is held down.

o

One frame is shot each time the 
shutter button is pressed.

j

*1

Take sequential shots using the 
focus, brightness (exposure) and 
white balance set in the fi rst frame.

W

The camera takes sequential shots 
at a faster speed than in [j].

*1 

The shooting speed varies depending on the settings 
for [Image Size/Compression] (p. 40).

  When set to [j], the fl ash (p. 35) cannot be set to 

[Redeye]. In addition, when set to [

W] the fl ash is 

fi xed to [Flash Off].

  When set to [

W], [Image Size] is limited to [3] or 

lower, and the ISO sensitivity is fi xed to [ISO Auto].

Using the LED illuminator

In a dark location, the LED illuminator can be used as an 
auxiliary light to see things or compose shots.

E down until the LED 

If you perform an operation when the LED 
illuminator is on, it will illuminate up to approx. 90 
seconds.

LED illuminator

  The LED illuminator turns off if no operation is 

performed for approx. 30 seconds.

  Even when the camera’s power is turned off, if 

E is 

pressed until the LED illuminator lights up, it lights for 
30 seconds.

Press and hold 

E down, until the LED illuminator 

turns off.