Netgear WNDR3400v3 – N600 Wireless Dual Band Router 설치 가이드

Modem

Ethernet cable to your modem, and

Step 2:

Connect one end of the yellow

and the other end to the
yellow Internet port on your router.

Step 6:

Open a browser.

Step 4:

Step 3:

Plug in, then turn on your modem.

Wait approximately two minutes
until your modem turns on.

If your modem has a battery backup,
first remove and reinsert the battery
before connecting your
modem to power.

N600 Wireless Router

Ethernet cable
(not included)

N600 Wireless Router

Package Contents

Power adapter

Ethernet cable

If the web page doesn’t display,
close and reopen the browser and
enter http://routerlogin.net in the
address bar. The user name and

(with stand attached)

Connect the power adapter to the
router, then plug it into an outlet.

If none of the LEDs light, make sure the
Power On/Off button is in the on position
(pushed in).

Attach the stand to the router:

1. Position the router so that the Power
button is at the bottom and the USB
port is at the top.

2. Snap each piece of the stand onto a
bottom corner of the router.

2.4

GHz

Step 1:

Unplug the power
to turn off your modem.

Step 5:

Connect your computer

Use another Ethernet cable to establish
a wired connection as shown in this diagram.

Optionally, connect wirelessly by using
the preset wireless security settings
located on the product label.

Router stand
(two pieces)

Power On/Off

to the router.

password are on the product label.

onto

o a

Wait for the 2.4 GHz LED ( ) to light.

Internet

Step 4:

N600 Wireless Dual Band Router

Model WNDR3400v3

Installation Guide

Ethernet cable

Power adapter

DSL
or cable

Laptop or desktop
computer