Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 관리자 가이드
272
|
Chapter 15. Security Management
ProSafe Managed Switch
2.
Use RADIUS to authenticate the dot1x users.
3.
Configure a RADIUS authentication server.
4.
Configure the shared secret between the RADIUS client and the server.
5.
Set the RADIUS server as a primary server.
6.
Configure an accounting server.
7.
Configure the shared secret between the accounting server and the client.
Web Interface: Authenticating dot1x Users by a RADIUS Server
1.
Enable routing for the switch.
(Netgear Switch) (Config)#aaa authentication dot1x default radius
(Netgear Switch) (Config)#radius server host auth 10.100.5.17
Netgear Switch) (Config)#radius server key auth 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456
(Netgear Switch) (Config)#radius server msgauth 10.100.5.17
(Netgear Switch) (Config)# radius server primary 10.100.5.17
(Netgear Switch) (Config)#radius accounting mode
(Netgear Switch) (Config)#radius server host acct 10.100.5.17
(Netgear Switch) (Config)#radius server key acct 10.100.5.17
Enter secret (16 characters max):123456
Re-enter secret:123456