Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch 관리자 가이드
![Netgear](https://files.manualsbrain.com/attachments/cf1ad5de25a3f8d6c88ef0ab489c1b137eebe11f/common/fit/150/50/17742d1e0cdacf24edeb88c30757620088415c5f7699f69b4517262e21e0/brand_logo.jpeg)
Chapter 6. RIP
|
75
ProSafe Managed Switch
Figure 9. Network with RIP on ports 1/0/2 and 1/0/3
Routing for the Switch
The example is shown as CLI commands and as a Web interface procedure.
CLI: Enable Routing for the Switch
Web Interface: Enable Routing for the Switch
1.
Select Routing > IP > Basic > IP Configuration. A screen similar to the following
displays.
displays.
2.
For Routing Mode, select the Enable radio button.
3.
Click Apply to save the settings.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#exit
Subnet 2
Subnet 3
Subnet 5
Port 1/0/3
192.130.3.1
192.130.3.1
Port 1/0/5
192.64.4.1
192.64.4.1
Port 1/0/2
192.150.2.2
192.150.2.2
Layer 3 sIwitch
acting as a router
acting as a router