Netgear R7000 – Nighthawk AC1900 Smart WiFi Router 사용자 설명서

You can disable LED blinking or turn off all LEDs except the Power LED. For information 
about how to do this, see 

118.

The rear panel has the connections and buttons shown in the following figure.

Pressing the Reset button restores the factory settings. See 

192. 

Ethernet ports 
1-4

The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 
Mbps or 10 Mbps Ethernet connections.

Solid. A powered-on device is connected to the Ethernet port.

Blinking. The port is sending or receiving traffic.

Off. No device is connected to this Ethernet port.

WiFi On/Off 
button with LED

Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.
If this LED is lit, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you 
cannot use WiFi to connect to the router.

WPS button with 
LED

This button lets you use WPS to join the WiFi network without typing the WiFi password. The 
WPS LED blinks white during this process and then lights solid white.