Netgear R7000 – Nighthawk AC1900 Smart WiFi Router 사용자 설명서

Your settings are saved.

The router delivers the following parameters to any LAN device that requests DHCP:

An IP address from the range that you have defined

Subnet mask

Gateway IP address (the router’s LAN IP address)

DNS server IP address (the router’s LAN IP address)

By default, the router acts as a DHCP server. The router assigns IP, DNS server, and default 
gateway addresses to all computers connected to the LAN. The assigned default gateway 
address is the LAN address of the router.

You can use another device on your network as the DHCP server, or specify the network 
settings of all your computers.



Launch a web browser from a computer or WiFi device that is connected to the network.

Enter http://www.routerlogin.net.

A login window displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home page displays.

Select ADVANCED > Setup > LAN Setup.

Clear the Use Router as DHCP Server check box.

Click the Apply button.

(Optional) If this service is disabled and no other DHCP server is on your network, set your 

computer IP addresses manually so that they can access the router.

When you specify a reserved IP address for a computer on the LAN, that computer always 
receives the same IP address each time it accesses the router’s DHCP server. Assign 
reserved IP addresses to computers or servers that require permanent IP settings. 



Launch a web browser from a computer or WiFi device that is connected to the network.

Enter http://www.routerlogin.net.