Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 설치 가이드
Quick Start
Nighthawk X6
AC3000 Tri-Band WiFi Router
AC3000 Tri-Band WiFi Router
Model R7900
Unplug your modem, remove and replace the backup battery if it uses one, and
then plug the modem back in. Use the Ethernet cable to connect the modem to
the yellow Internet port on the router.
then plug the modem back in. Use the Ethernet cable to connect the modem to
the yellow Internet port on the router.
Note:
If your Internet connection does not require a modem, connect your
main Ethernet cable to the yellow Internet port on the router.
Connect the router to a power source. The router’s Power LED lights amber and
then turns white when the router is ready.
then turns white when the router is ready.
Make sure that the router’s WiFi LED is lit. Find the router’s preassigned WiFi
network name and password on the label on the router.
Open the WiFi connection manager on your WiFi-enabled computer or mobile
device, find the router’s WiFi network name, and use the router’s password to
connect.
Launch a web browser. If the NETGEAR installation assistant does not display, visit
network name and password on the label on the router.
Open the WiFi connection manager on your WiFi-enabled computer or mobile
device, find the router’s WiFi network name, and use the router’s password to
connect.
Launch a web browser. If the NETGEAR installation assistant does not display, visit
. If a login window displays, enter
admin for the user name
and
password for the password.
Follow the NETGEAR installation assistant.
For the best WiFi performance, position the antennas as shown.
Package Contents
Router
Power adapter
(varies by region)
Ethernet cable
2. Restart Your Modem and Plug In Your Router
3. Connect to the Internet
1. Position the Antennas
90°
90°