Netgear JWNR2010v5 - N300 Wireless Router 사용자 설명서
Troubleshooting
81
JWNR2010v5 N300 Wireless Router
•
Make sure that you have not pressed the WPS button on the front of the router after
disabling the WPS feature (you logged in to the router and disabled this feature
previously).
disabling the WPS feature (you logged in to the router and disabled this feature
previously).
•
Check to see if the router is stuck in the AP setup locked state (if you are using the
wireless repeater function). To resolve this situation, either restart the router, or do the
following:
wireless repeater function). To resolve this situation, either restart the router, or do the
following:
1.
Select ADVANCED > Advanced Setup > Wireless Settings.
The Advanced Wireless Settings screen displays.
2.
Select the Enable Router's PIN check box.
3.
Click the Apply button.
Cannot Log In to the Router
If you are unable to log in to the router from a computer on your local network, check the
following:
following:
•
If you are using an Ethernet-connected computer, check the Ethernet connection
between the computer and the router as described in
between the computer and the router as described in
78.
•
Make sure that your computer’s IP address is on the same subnet as the router. If you
are using the recommended addressing scheme, your computer’s address is in the range
of 192.168.1.2 to 192.168.1.254.
are using the recommended addressing scheme, your computer’s address is in the range
of 192.168.1.2 to 192.168.1.254.
•
If your computer’s IP address is shown as 169.254.x.x, recent versions of Windows and
Mac OS generate and assign an IP address if the computer cannot reach a DHCP server.
These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in
this range, check the connection from the computer to the router, and reboot your
computer.
Mac OS generate and assign an IP address if the computer cannot reach a DHCP server.
These autogenerated addresses are in the range of 169.254.x.x. If your IP address is in
this range, check the connection from the computer to the router, and reboot your
computer.
•
If your router’s IP address was changed and you do not know the current IP address,
clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. This procedure is explained in
clear the router’s configuration to factory defaults. This sets the router’s IP address to
192.168.1.1. This procedure is explained in
•
Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click the Refresh button to be sure that the Java applet is loaded.
Internet Explorer, click the Refresh button to be sure that the Java applet is loaded.
•
Try quitting the browser and launching it again.
•
Make sure that you are using the correct login information. The factory default login name
is admin and the password is password. Make sure that Caps Lock is off when you enter
this information.
is admin and the password is password. Make sure that Caps Lock is off when you enter
this information.
•
If you are attempting to set up your NETGEAR router as a replacement for an ADSL
gateway in your network, the router cannot perform many gateway services. For
example, the router cannot convert ADSL or cable data into Ethernet networking
information. NETGEAR does not support such a configuration.
gateway in your network, the router cannot perform many gateway services. For
example, the router cannot convert ADSL or cable data into Ethernet networking
information. NETGEAR does not support such a configuration.