Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 사용자 설명서
Manage Your Network
145
Nighthawk
X6
AC3000
Tri-Band
WiFi Router
•
A metric value of 1 works because the ISDN router is on the LAN.
•
The Private checkbox is selected only as a precautionary security measure in case RIP
is activated.
is activated.
Set Up a Static Route
To set up a static route:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Static Routes.
The Static Routes screen displays.
5.
Click the Add button.
6.
In the Route Name field, type a name for this static route (for identification purposes only).
7.
Select the Private check box if you want to limit access to the LAN only.
If the Private check box is selected, the static route is not reported in RIP.
8.
Select the Active check box to make this route effective.
9.
Type the IP address of the final destination.
10.
Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
11.
Type the gateway IP address.
This address must be on the same LAN segment as the router.