Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 사용자 설명서
Specify Internet Port Settings
165
Nighthawk
X6
AC3000
Tri-Band
WiFi Router
In the field, you can enter the port, port range, or both. If you enter more than one value in
the field, separate each value with a comma. For example, 30, 50–60.
the field, separate each value with a comma. For example, 30, 50–60.
11.
Specify the internal ports by one of these methods:
•
Leave the Use the same port range for Internal port check box selected.
•
Clear the Use the same port range for Internal port check box and type the internal
port range in the Internal Port Range field.
port range in the Internal Port Range field.
In the field, you can enter the port, port range, or both. If you enter more than one
value in the field, separate each value with a comma. For example, 30, 50–60.
value in the field, separate each value with a comma. For example, 30, 50–60.
12.
In the Internal IP address field, type the IP address, or select the radio button for an
attached device listed in the table.
13.
Click the Apply button.
The service is now in the list on the Port Forwarding/Port Triggering screen.
Edit a Port Forwarding Service
To edit a port forwarding entry:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the
web browser.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > Port Forwarding/Port Triggering.
The Port Forwarding/Port Triggering screen displays.
5.
Leave the Port Forwarding radio button selected as the service type.
6.
In the table, select the radio button next to the service name.
7.
Click the Edit Service button.
The Ports - Custom Services screen displays.
8.
Change the settings as needed.
9.
Click the Apply button.
Your changes are saved.