Netgear R7900 - Nighthawk X6—AC3000 Tri-Band WiFi Gigabit Router 사용자 설명서

Some devices, such as an IPTV, cannot work behind a router’s network address translation 
(NAT) or firewall. Based on what your Internet service provider (ISP) requires, for the device 
to connect to the ISP’s network directly, you can enable the bridge between the device and 
the router’s Internet port or add new VLAN tag groups to the bridge. 

If your device, such as an IPTV, is connected to the router’s Ethernet port or WiFi network, 
you can enable the bridge so that the packets sent between the device and the router’s 
Internet port are not processed through the router’s network address translation (NAT).



Launch a web browser from a computer or wireless device that is connected to the 

network.

Enter http://www.routerlogin.net or http://www.routerlogin.com in the address field of the 

web browser.

A login screen displays.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and 
password are case-sensitive.

The BASIC Home screen displays.

Select ADVANCED > Advanced Setup > VLAN/IPTV Setup.

The VLAN/IPTV Setup screen displays.

Select the Enable VLAN/IPTV Setup check box.

Select the By bridge group radio button.

Select a Wired Ports check box or a Wireless check box:

If your device is connected to an Ethernet port on the router, select a Wired Ports 
check box that corresponds to the Ethernet port on the router that the device is 
connected to.

If your device is connected to your router’s WiFi network, select a Wireless check box 
that corresponds to the router’s WiFi network that the device is connected to.

1400

Maximum size for AOL DSL.

576

Typical value to connect to dial-up ISPs.