Netgear JWNR2000v2 - Wireless-N 300 Router 사용자 설명서

Router Setup Preparation

You can set up your router with the Smart Wizard on the Resource CD as described in the 
installation guide with the Setup Wizard (see 

23). Before you start the setup process, you need to 

have your ISP information on hand and make sure the laptops, PCs, and other devices in the 
network have the settings described here.

Use Standard TCP/IP Properties for DHCP

If you configured your computer to use a static IP address, you need to change the settings 
back so that it uses Dynamic Host Configuration Protocol (DHCP). See 

Replace an Existing Router

To replace an existing router, disconnect it completely from your network and set it aside 
before starting the router setup. 

Gather ISP Information

You need the following information to set up your router and to check that your Internet 
configuration is correct. Your Internet Service Provider (ISP) should have provided you with 
all of the information needed to connect to the Internet. If you cannot locate this information, 
ask your ISP to provide it. When your Internet connection is working, you no longer need to 
launch the ISP’s login program on your computer to access the Internet. When you start an 
Internet application, your router automatically logs you in.

Active Internet service provided by a DSL account

The ISP configuration information for your DSL account

ISP login name and password

ISP Domain Name Server (DNS) addresses

Fixed or static IP address

Host and domain names

Depending on how your ISP set up your Internet account, you could need to know 
one or more of these settings for a manual setup:

Virtual path identifier (VPI) and virtual channel identifier (VCI) parameters

Multiplexing method

Host and domain names