Netgear JWNR2000v2 - Wireless-N 300 Router 사용자 설명서

Add Clients (Computers or Devices) to Your Network

Choose either the manual or the WPS method to add wireless computers or devices to your 
wireless network.

Manual Method

Open the software that manages your wireless connections on the wireless device 

(laptop computer, gaming device, iPhone) that you want to connect to your router. This 

software scans for all wireless networks in your area.

Look for your network and select it.If you did not change the name of your network during 

the setup process, look for the default Wi-Fi network name (SSID) and select it. The default 

Wi-Fi network name (SSID) is located on the product label on the bottom of the router.

When prompted, enter the passphrase (password) to join the wireless network. This is the 

password that you set up in the Wireless Settings screen in the Security Options section.

Repeat steps 1–3 to add other wireless devices.

Wi-Fi Protected Setup (WPS) Method

Wi-Fi Protected Setup (WPS) is a standard that lets you easily join a secure wireless network 
with WPA or WPA2 wireless security. The router automatically sets security for each 
computer or device that uses WPS to join the wireless network. To use WPS, make sure that 
your wireless devices are Wi-Fi certified and support WPS. NETGEAR products that use 
WPS call it Push 'N' Connect.

1

 

If the wireless network name (SSID) changes each time you add a 

WPS client, the Keep Existing Wireless Settings check box on the 
Advanced Wireless Settings screen has been cleared. See 

this setting.

You can use a WPS button or the router interface method to add wireless computers and 
devices to your wireless network.

Press the 

WPS button on the rear panel of the router.

Within 2 minutes, press the 

WPS button on your wireless computer or device, or follow the 

WPS instructions that came with the computer. The device is now connected to your router.

Repeat steps 1–2 to add other WPS wireless computers or devices.