Netgear JWNR2000v2 - Wireless-N 300 Router 사용자 설명서

In the 

Passphrase field, enter a word or group of 8–63 printable characters. The 

passphrase is case-sensitive.

Click 

Apply to save your settings.

Set Up WEP Wireless Security

WEP Shared Key authentication and WEP data encryption can be defeated by a determined 
eavesdropper using publicly available tools.

If you use a wireless computer to setup WEP, you will be disconnected when you click 

Apply. 

You can rejoin the network with its new security settings or use a wired connection to make 
further changes. router. Not all wireless devices support passphrases. If yours does not, then 
you will need to manually enter the WEP key in order to join the wireless network.

Select 

Setup > Wireless Settings .

In the Mode field, select the legacy mode setting of 

Up to 54 Mpbs.

The WEP and WPA radio buttons display in the Security Options section of the screen. 

Select the 

WEP radio button and the screen expands as shown in the following figure:

.

Select the authentication type and encryption strength.