Netgear JWNR2000v2 - Wireless-N 300 Router 사용자 설명서
98
|
Appendix A. Supplemental Information
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Factory Default Settings
Table 1. Router Default Settings
Feature
Default Setting
Router Login URL
http://www.routerlogin.net or http://www.routerlogin.com
Login name (case-sensitive)
admin (printed on product label)
Login password (case-sensitive)
password (printed on product label)
WAN MAC address
Default hardware address (on label)
MTU Size
1500
LAN IP address (gateway IP address)
192.168.1.1 (printed on product label)
Router subnet
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
GMT
Adjust for daylight saving time
Disabled
Allow a registrar to configure this router
Enabled
Wireless communication
Enabled
SSID Name
NETGEAR
Security
Disabled
Wireless access list (MAC Filtering)
All wireless stations allowed
Broadcast SSID
Enabled
Transmission speed
Auto
*
*. Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead lower actual data throughput rate.
Network conditions and environmental factors, including volume of network traffic, building materials and
construction, and network overhead lower actual data throughput rate.
Country/Region
United States in NA only, otherwise varies by country and region
RF channel
6 until region selected
Operating mode
145 Mbps
Data rate
Best
Output power
Full
Inbound communication from the Internet
Disabled (bars unsolicited requests except traffic on port 80, the
http port)
http port)
Outbound communication to the Internet
Enabled (all)