Netgear R6900 - Nighthawk AC1900 Smart WiFi Router 사용자 설명서

Solid white. The 5 GHz WiFi radio is operating.

Blinking white. The router is sending or receiving WiFi traffic.

Off. The 5 GHz WiFi radio is off.

5 GHz WiFi

Solid white. The guest WiFi network is operating.

Blinking white. The router is sending or receiving WiFi traffic.

Off. The guest WiFi network is off.

Guest WiFi

Solid white. A USB device is connected and is ready.

Blinking white. A USB device is plugged in and is trying to connect.

Off. No USB device is connected, or someone clicked the Safely Remove Hardware button and it
is now safe to remove the attached USB device.

USB 3.0 port

The LED color indicates the speed: white for Gigabit Ethernet connections and amber for 100 Mbps or
10 Mbps Ethernet connections.

Solid white or solid amber. A powered-on device is connected to the Ethernet port.

Blinking white or blinking amber. The port is sending or receiving traffic.

Off. No device is connected to this Ethernet port.

Ethernet ports 1–4

Pressing this button for two seconds turns the 2.4 GHz and 5 GHz WiFi radios on and off.

If this LED is solid white, the WiFi radios are on. If this LED is off, the WiFi radios are turned off and you
cannot use WiFi to connect to the router.

WiFi On/Off button with
LED

This button lets you use WPS to join the WiFi network without typing the WiFi password. The WPS LED
blinks white during this process and then lights solid white.

WPS button with LED

For information about disabling LED blinking for network communications and turning off all LEDs except the Power
LED, see 

 on page 191.

The back panel of the router provides ports, buttons, antenna connectors, and a DC power connector. For information
about attaching the antennas, see