Netgear R6900 - Nighthawk AC1900 Smart WiFi Router 사용자 설명서

If you blocked all new devices from connecting, to allow the computer or device that you are currently using
to continue to access the network, select the check box next to your computer or WiFi device in the table,
and click the Allow button.

To either continue to allow or to block other computers and devices that are currently connected, select the
check box next to the computer or device in the table, and click either the Allow button or the Block button.

Click the Apply button.

Your settings are saved.

You can use access control to block or allow access to your network. An access control list (ACL) functions with the
MAC addresses of wired and WiFi devices that can either access your entire network or are blocked from accessing
your entire network.

The router can detect the MAC addresses of devices that are connected to the network and list the MAC addresses
of devices that were connected to the network.

Each network device owns a MAC address, which is a unique 12-character physical address, containing the
hexadecimal characters 0–9, a–f, or A–F (uppercase or lowercase) only, and separated by colons (for example,
00:09:AB:CD:EF:01). Typically, the MAC address is on the label of the WiFi card or network interface device. If you
cannot see the label, you can display the MAC address using the network configuration utilities of the computer.
You might also find the MAC addresses through the web pages of the router (see 

 on page 199).

If you set up an access list that blocks all new devices from accessing your network, you must specify which devices
are allowed to access your network.