Netgear R7800 - Nighthawk X4S AC2600 Smart WiFi Router 사용자 설명서

The router’s internal WiFi radios broadcast signals in the 2.4 GHz and 5 GHz ranges. By default, they are on so that
you can connect over WiFi to the router. When the WiFi radios are off, you can still use an Ethernet cable for a LAN
connection to the router.

You can turn the WiFi radios on and off with the WiFi On/Off button on the router, or you can log in to the router
and enable or disable the WiFi radios. If you are close to the router, it might be easier to press its WiFi On/Off button.
If you are away from the router or already logged in it might be easier to enable or disable them. You can also turn
the WiFi radios off and on based on a schedule. (See 

 on page 77.)

Press the WiFi On/Off button on the top of the router for two seconds.

If you turned off the WiFi radios, the WiFi On/Off LED and the WPS LED turn off. If you turned on the WiFi radios,
the WiFi On/Off LED and the WPS LED light.

If you used the WiFi On/Off button to turn off the WiFi radios, you can’t log in to the router to turn them back on.
You must press the WiFi On/Off button again for two seconds to turn the WiFi radios back on.

Launch a web browser from a computer or WiFi device that is connected to the network.

Enter http://www.routerlogin.net.

A login window opens.

Enter the router user name and password.

The user name is admin. The default password is password. The user name and password are case-sensitive.

The BASIC Home page displays.