Netgear WNDAP620 – ProSAFE 3x3 Single Radio, Dual Band Wireless-N Access Point 참조 매뉴얼

A computer on either LAN segment should be able to connect to the Internet or share files 

and printers of any other computers or servers connected to LAN Segment 1 or LAN 
Segment 2.

Configure a Point-to-Multipoint Wireless Network

In a point-to-multipoint bridge, the wireless access point is the master for a group of 
bridge-mode wireless access points. All traffic is sent to the master rather than to the other 
wireless access points. Use wireless security to protect this communication.

For each wireless access point that you want the master to be able to connect to, you need to 
configure a security profile with a unique name and the MAC address of the wireless access 
point. You can configure up to four such security profiles (NETGEAR-WDS-1, 
NETGEAR-WDS-2, and so on).

The following figure shows an example in which AP1 functions in point-to-multipoint bridge 
mode and AP2 and AP3 function in point-to-point bridge mode:



Configure the security profiles on the wireless access point (AP1 on LAN Segment 1 in 
the previous figure):

a. Select Configuration > Wireless Bridge. The Bridging screen displays. (The 

following figure shows the screen after you have completed