Netgear WNDAP660 – ProSAFE 3x3 Dual Radio, Dual Band Wireless-N Access Point 설치 설명서

)NSTALLATION

Unpack the box and verify the contents:
•     ProSafe 3x3 Single Radio Dual Band Wireless-N Access Point WNDAP620
•     Straight through Category 5 Ethernet cable
•     Power adapter and cord (12V, 1.5A)
•     Ceiling mount kit
•     Installation Guide
•     Resource CD, which includes link to the Reference Manual

Follow these instructions to set up your wireless access point. Before proceeding 
with the WNDAP620 installation, familiarize yourself with the contents of the 
Resource CD. See the Reference Manual for instructions on advanced 
configuration options. 

Tip:  Before mounting the access point in a high location, first set up 
and test the unit to verify wireless network connectivity.

1.    Connect the wireless access point to your computer.

a. Prepare a PC with an Ethernet adapter. If this PC is already part of your 

network, record its TCP/IP configuration settings. Configure the PC with a 

static IP address of 192.168.0.210 and 255.255.255.0 as the subnet mask.

b. Connect an Ethernet cable from the access point to the PC (point A in the 

illustration).