Netgear WC7600v2 – ProSAFE Wireless Controller 사용자 설명서
Manage Security Profiles and Profile Groups
127
ProSAFE Wireless Controller
Authentication Settings section
Note:
The options that display onscreen depend on the selection from Network Authentication menu.
Note:
The MAC ACL
button displays only when
you select Open System,
Shared Key, WPA-PSK,
WPA2-PSK, or
WPA-PSK & WPA2-PSK
from the Network
Authentication menu.
you select Open System,
Shared Key, WPA-PSK,
WPA2-PSK, or
WPA-PSK & WPA2-PSK
from the Network
Authentication menu.
MAC ACL
Select one of the following radio buttons:
•
Local. Use local MAC authentication.
The Local MAC ACL Group menu displays
so you can
•
External. Use external MAC authentication.
The External Radius Server menu displays so you can
select a server. You can select either the basic-Auth
RADIUS server or a RADIUS server of an advanced
authentication group. You cannot use the external LDAP
server.
select a server. You can select either the basic-Auth
RADIUS server or a RADIUS server of an advanced
authentication group. You cannot use the external LDAP
server.
For information about setting up and enabling internal and
external authentication servers, see
external authentication servers, see
Note:
The MAC ACL radio buttons do not display onscreen if
the network authentication uses an external RADIUS server.
The reason for this is that you can configure either MAC
authentication with an external RADIUS server or network
authentication with an external RADIUS server, but not both.
That is, if you configure an external RADIUS server with WPA,
WPA2, or WPA & WPA2 (or you use Legacy 802.1X), you
cannot use external MAC authentication, and the MAC ACL
radio buttons do not display onscreen. You can still use internal
MAC authentication.
The reason for this is that you can configure either MAC
authentication with an external RADIUS server or network
authentication with an external RADIUS server, but not both.
That is, if you configure an external RADIUS server with WPA,
WPA2, or WPA & WPA2 (or you use Legacy 802.1X), you
cannot use external MAC authentication, and the MAC ACL
radio buttons do not display onscreen. You can still use internal
MAC authentication.
Note:
The Captive
Portal check box displays
only when you select
Open System, Shared
Key, WPA-PSK,
WPA2-PSK, or
WPA-PSK & WPA2-PSK
from the Network
Authentication menu.
only when you select
Open System, Shared
Key, WPA-PSK,
WPA2-PSK, or
WPA-PSK & WPA2-PSK
from the Network
Authentication menu.
Captive Portal Select the Captive Portal check box if you want to enable a
guest portal or captive portal.
The Captive Portal menu displays so you can select a portal.
You can select either the Basic portal or a portal from the
advanced portal group.
You can select either the Basic portal or a portal from the
advanced portal group.
Note:
If the network authentication uses a RADIUS server,
whether it is a local server or an external server, you cannot
configure captive portal authentication. That is, if you configure
a RADIUS server with WPA, WPA2, or WPA & WPA2 (or if you
use legacy 802.1X), the Captive Portal check box is not shown
onscreen.
configure captive portal authentication. That is, if you configure
a RADIUS server with WPA, WPA2, or WPA & WPA2 (or if you
use legacy 802.1X), the Captive Portal check box is not shown
onscreen.
Setting
Description