Netgear WC7600v2 – ProSAFE Wireless Controller 사용자 설명서

Wireless Mode

The selections that are available depend on the selected radio mode. 
From the menu select the wireless mode:

802.11b/bg/ng mode:

802.11b. 

802.11bg. 

802.11ng. This is the default setting.

802.11a/na/ac mode:

802.11a. 

802.11na. 

802.1na/ac. This is the default setting.

If you select 802.11bg or 802.11b mode, both 802.11n- and 

802.11g-compliant devices can connect to the access points. However, 
if you select 802.11ng mode, 802.11b-compliant devices cannot 
connect.

Data Rate

By default, the transmit data rate of the WiFi network is set to Best. You 
cannot manually change the transmit data rate.

For 802.11na and 802.11ac devices, the page shows separate 

data rates with the default setting Best.

Channel Width
(802.11ng and 802.11na/ac only)

From the menu, select the channel width:

20 MHz Static. This is the default setting if the selection from the 
Wireless Mode menu is 802.11ng. 

20/40 MHz Dynamic.

20/40/80 MHz Dynamic. This is the default setting if the selection 
from the Wireless Mode menu is 802.1na/ac. This setting is an 
option for 802.11na/ac devices only and does not apply to 802.11ng 
devices.

A wider channel improves the performance, but some legacy devices 

can operate only with a 20 MHz channel width.

Guard Interval
(802.11ng and 802.11na/ac only)

From the menu, select a value that protects transmissions from 
interference. 

A shorter guard interval improves performance, but some legacy 

devices can operate only with a long guard interval.

RTS Threshold (0-2347)

Enter the size of the Request to Send (RTS) threshold packet.

The RTS threshold is related to the transmission mechanism 
(CSMA/CA or CSMA/CD) for the packets. If the packet size is equal to 
or less than this threshold, the data frame is transmitted immediately; if 
the packet size is larger than the specified value, the transmitting 
station must send an RTS threshold packet to the receiving station, and 
must wait for the receiving station to return a Clear to Send (CTS) 
packet before sending the actual packet data.

Beacon Interval (100-1000)

Enter the time interval for each beacon transmission that allows the 
access point to synchronize the WiFi network.