Netgear WC7600v2 – ProSAFE Wireless Controller 사용자 설명서

Configure the settings as described in the following table.

To run channel allocation immediately, click the Run Now button.

The selected channels are applied to the managed access points. This option is useful 
when you add a new access point or change your network.

Click the Apply button.

Your settings are saved. If enabled, the channel allocation occurs according to the 
configured schedule.

Automatic channel allocation

Ensure that the enable radio button is selected during normal 
operation. 

Automatic channel allocation distributes channels across the 

managed access points to reduce interference. To disable 
automatic channel allocation, select the disable radio button.

Valid corporate channels

Specify the WiFi band by selecting the 2.4 GHz or 5 GHz check box. 
For each WiFi band, the following applies:

You can remove one or more channels from the list of available 
channels by clearing their check boxes. For example, you might 
want to avoid interference with competing equipment such as in 
a medical environment in which medical devices use a specific 
channel.

You cannot add channels. The wireless controller determines 
available channels based on the country or region that you 
specified on the General Settings page (see 

Prevent channel change during

If the wireless controller is 

prevented from reallocating a channel 
because it is in use, the wireless 
controller checks again at the next 
scheduled channel allocation. 

Active voice call 

Select the enable radio button to prevent 
channel changes during voice calls. 

Select the disable radio button to allow channel 
changes during voice calls. Disabled is the 
default setting.

High Traffic Load

Select the enable radio button to prevent 
channel changes during a high traffic load.

Select the disable radio button to allow channel 
changes during a high traffic load. Disabled is 
the default setting.

Schedule channel allocation

We recommend that you 

schedule channel allocation once a 
day at times when the fewest clients 
are expected to be connected. 

Run channel 
allocation at

From the menus, select the hour and minutes 
when the channel allocation must run.

Run channel 
allocation every

Select the check boxes to specify the day or 
days when the channel allocation must run.