Netgear WC7600v2 – ProSAFE Wireless Controller 사용자 설명서

The Stacking table shows the following fields:

To add another wireless controller, repeat 

 through 

To synchronize the profiles, captive portals, and user management settings of the master 
controller to a slave controller in the stack, do the following:

a. In the Stacking table, select the radio button for the slave controller that you want to 

synchronize.

b.  Click the Sync button.

c.  Confirm that you want to allow the slave controller to reboot.

After synchronization, the slave controller reboots.

Select Monitor > Network > Summary.

The Summary page displays for the network.

The web management interface displays an additional Network menu 
tab with the network Summary page in view. The network Summary 
page displays information about the stacking configuration.

Click the REFRESH button.

The Summary page displays the new stacking information.

On a slave controller in the stack, if you add the master controller as a 
stack member, the slave controller becomes the new master controller, 
and the original master controller becomes the new slave controller. For 
information about selecting which controller to configure, see 

Role

The role or function that the wireless controller provides in the stack: either Master or 
Slave.

Controller IP

The IP address of the wireless controller. In a stacking configuration, the controller IP 
address is identical to the local IP address.

Local IP

The local IP address of the wireless controller in the stacking group. This IP address 
remains constant. The role of the wireless controller (that is, master or slave) does not 
affect the local IP address.

Master IP

The IP address of the master in the stack.