Manualsbrain.com
  1. 매뉴얼
  2. 브랜드
  3. Netgear
  4. WC7600v2 – ProSAFE Wireless Controller
  5. 사용자 설명서

Netgear WC7600v2 – ProSAFE Wireless Controller 사용자 설명서

다운로드
페이지 중 398
System Planning and Deployment Scenarios 
45
 ProSAFE Wireless Controller
The access points and wireless controller are connected in the same subnet and use the 
same IP address range that is assigned for that subnet. The configuration does not include 
any routers between the access points and the wireless controller. The access points are 
connected to a PoE switch, which, in turn, is connected to the wireless controller. The uplink 
of the PoE switch connects to a Layer 3 switch or router that provides Internet access.
To provision the wireless controller:
Step
Configuration
Web Management Interface Path
1.
Configure the system and network settings of the wireless 
controller:
 
1.
Configure the country code of operation.
Configuration > System > General
2.
Configure the time settings.
Configuration > System > Time
3.
Configure the IP address of the wireless controller.
Configuration > System > IP/VLAN
4.
Verify that VLAN 1 is set as the management VLAN and is 
marked as untagged.
By default, VLAN 1 an untagged management VLAN.
5.
If no network DHCP server is accessible to the access points, 
configure the wireless controller’s DHCP server.
Configuration > System > DHCP 
Server
2.
Configure up to eight profiles, and for each profile, do at least the 
following:
 
1.
Configure an SSID for WiFi access.
Configuration > Profile > Basic
2.
Configure the network authentication and data encryption.
3.
Assign the VLAN.
4.
If necessary for the selected network authentication option, 
configure the authentication server.
Configuration > Security > Basic > 
Authentication Server
3.
Use any port of the wireless controller to connect the WiFi PoE 
switch.
 
4.
Deploy the access points and connect them to the same WiFi 
PoE switch.