Netgear WC7600v1 - ProSAFE Wireless Controller 사용자 설명서

Shared Key

64-bit WEP

128-bit WEP

152-bit WEP

To configure Shared Key authentication with WEP:

From the Data Encryption menu, select a level of WEP 
encryption:

64-bit WEP. Uses 40/64-bit encryption.

128-bit WEP. Uses 104/128-bit encryption.

152-bit WEP. A proprietary mode that works only with 
other WiFi devices that support this mode.

To display the characters in the key fields, select the Show 
Key check box.

Select a key radio button (Key1, Key2, Key3, or Key4).

Enter a key in the corresponding field:

64-bit WEP requires a key with 10 characters.

128-bit WEP requires a key with 26 characters.

152-bit WEP requires a key with 32 characters.

For information about requirements for WEP keys, see 

Legacy 802.1x

None

To configure legacy 802.1x authentication:

Set up and enable an internal or external (RADIUS or LDAP) 
authentication server. 
For information, see 

Select the Local or External radio button.

If you select the External radio button, select the 
authentication server that you wish to use from the menu.

WPA with Radius

TKIP

TKIP + AES

To configure WPA authentication with a RADIUS server:

Set up and enable an internal or external (RADIUS or LDAP) 
authentication server. 
For information, see 

From the Data Encryption menu, select the type of 
encryption:

TKIP. Supports Temporal Key Integrity Protocol (TKIP) 
only.

TKIP + AES. Supports both TKIP and Advanced 
Encryption Standard (AES).

Select the Local or External radio button.

If you select the External radio button, select the 
authentication server that you wish to use from the menu.