Netgear WC7600v1 - ProSAFE Wireless Controller 사용자 설명서
Monitor the WiFi Network and Its Components
325
ProSAFE Wireless Controller
To view the wireless controller Summary page:
1.
Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2.
Enter your user name and password.
3.
Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
page.
4.
Select Monitor > Controller > Summary.
The following table describes the fields of the Network Status, Wireless Clients, Most
Active APs, Most Active Clients, and Most Active SSIDs tables of the page. The
Controller Info section is self-explanatory.
Note:
If you configure redundant controllers, the page also displays
information about the status of the redundancy configuration. This
information is self-explanatory.
information about the status of the redundancy configuration. This
information is self-explanatory.
Item
Description
Network Status
Total
Up
The total number of managed devices that are running correctly.
Down
The total number of managed devices that cannot be pinged.
Alarms
Critical
The wireless controller can ping these managed devices, but either cannot log in or
detected that these devices are different from the ones that were configured.
detected that these devices are different from the ones that were configured.
Major
The number of managed devices for which the configuration differs from the one
that is set on the wireless controller. This situation occurs most likely because the
device runs outdated firmware or the wireless controller changed the configuration
while the device was down or offline.
that is set on the wireless controller. This situation occurs most likely because the
device runs outdated firmware or the wireless controller changed the configuration
while the device was down or offline.