Netgear WC7600v1 - ProSAFE Wireless Controller 사용자 설명서

The WiFi auto planning advisor bases its calculations on the building and floor definitions and 
lets you enter the following parameters to determine the WiFi coverage for your environment:

NETGEAR antenna (see 

For each WiFi band of a selected access point, the following parameters:

802.11 protocol (depending on the access point, 802.11b/g/n, 802.11a/n/ac, or both)

Transmit power (from minimum power to full power)

The antenna gain and maximum number of supported clients for a 
selected access point are set automatically.

Percentage of expected WiFi coverage (from 10 percent to 100 percent)

The minimum required signal strength (from –95 dBm to –30 dBm)

The signal strength determines the automatic channel allocation and automatic 
transmission power of the access points.

The WiFi band (2.4 GHz or 5 GHz)

The maximum number of clients that must be supported on the floor

For you to determine the expected financial investment, the WiFi auto planning advisor also 
lets you enter a price for the selected access point and a price for the selected antenna. 
Whether or not you enter a price, the WiFi auto planning advisor generates an inventory list. 
For more information, see 

The WiFi auto planning advisor creates a heat map for the 2.4 GHz band, the 5 GHz band, or 
for both bands. To optimize the WLAN network coverage and throughput for your RF plan, 
you can manually fine-tune the placement of access points and antennas on the floor map. 

For more information about adding and managing access points and antennas on a floor 
map, see the following sections: