Netgear WC7500 - ProSAFE® Wireless Controller 사용자 설명서

The previous figure shows the fields that display when you select the FTP radio button. 
When you select the TFTP or Local File radio button, fewer fields are shown.

Configure the settings as described in the following table.

TFTP, FTP, or Local File

Select one of the following radio buttons to specify from which location the 
upgrade must occur. The page adjusts to display the fields that are required for 
each upgrade location.

TFTP. Upgrade from a TFTP server. The Server IP and File Name server 
parameters fields display.

FTP. Upgrade from an FTP server. The Server IP, File Name, User Name, 
and  Password server parameters fields display.

Local File. Upgrade from a local file that you downloaded. The server 
parameter fields do not display, but the Browse button becomes available. 
To select the firmware upgrade file from your computer, follow the 
directions of your browser.

If your WiFi controller runs a 3.x or 4.x firmware version and you want to 

upgrade to a 5.x version, you must upgrade the firmware by using a TFTP or 
FTP server. You cannot upgrade the firmware from a local file. 

Server IP

Enter the IP address of the TFTP or FTP server.

File Name

Enter the file name of the firmware.

User Name (FTP only)

Enter the user name to access the FTP server.