Netgear WC7500 - ProSAFE® Wireless Controller 사용자 설명서

This network configuration requires the following conditions:

•     VLAN 1 is configured on the wireless controllers, core switch, and PoE switches. This 

VLAN is untagged.

•     VLANs 10, 20, and 30 are configured on the wireless controllers, core switch, and the 

PoE switch in Building 1. These VLANs are tagged.

•     VLANs 1, 10, 20, 30, and 40 are configured on the wireless controllers, core switch, and 

PoE switches. Except for VLAN 1, these VLANs are tagged.



Configure the basic system settings:

Configure the country code of operation.

Configure the time settings.

Configure the IP address of wireless controller.

Verify that VLAN 1 is set as the management VLAN and is 
marked as untagged.

By default, VLAN 1 an untagged management VLAN.

If no network DHCP server is accessible to the access points, 
configure the wireless controller’s DHCP server.

Configure the following profiles, and configure network 
authentication and data encryption for these profiles:

A profile with SSID 1 and VLAN 10.

A profile with SSID 2 and VLAN 20.

A profile with SSID 2 and VLAN 30.

A profile with SSID 3 and VLAN 40.

If necessary for the selected network authentication options, 
configure one or more authentication servers.

Configure the following profile groups:

A profile group with the name Building 1, to which you add the 

following profiles:

- The profile with SSID 1 and VLAN 10

- The profile with SSID 2 and VLAN 20

- The profile with SSID 2 and VLAN 30

A profile group with the name Building 2, to which you add the 

following profiles:

- The profile with SSID 1 and VLAN 10

- The profile with SSID 2 and VLAN 30

- The profile with SSID 3 and VLAN 40