Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point 사용자 설명서
Introduction
12
ProSAFE Dual Band Wireless N Access Point WNDAP350
Hardware Description
This section describes the front and rear hardware functions of the WNDAP350.
Front Panel
The WNDAP350 front hardware functions are described below.
Figure 1.
The following table explains the LED indicators:
Table 1. Front Panel LED Indicators
Item
LED
DESCRIPTION
1
PWR/TEST
Power Indicator
Off
No power.
On
Power is on.
Blink
Indicates self test, loading software, or system fault (if continues).
Note: This LED may blink for a minute before going off.
2
100
Ethernet LAN Speed Indicator
Off
Indicates 10 Mbps or no link detected.
Yellow
Indicates 100 Mbps link detected.
Green
Indicates 1000 Mbps link detected.
3
LINK/ACT LAN
Ethernet LAN Link Activity Indicator
Off
Indicates no Ethernet link detected.
Blink
(Green)
(Green)
Indicates data traffic on the 1000Mbps Ethernet LAN.
1
2
3
4
5